TLP250F 2002-09-25 1 toshiba photocoupler gaa ? as ired & photo-ic TLP250F transistor inverter inverter for air conditionor igbt gate drive power mos fet gate drive the toshiba TLP250F consists of a gaa ? as light emitting diode and a integrated photodetector. this unit is 8 ? lead dip. TLP250F is suitable for gate driving circuit of igbt or power mos fet. input threshold current: i f = 5ma (max.) supply current: 11 ma (max.) supply voltage: 1 0~35v output current: 1 .5a (max.) switching time: t phl , t plh = 0.5s (max.) isolation voltage: 2500 v rms (min.) ul recognized: ul 1 577, file no. e67349 option (d4) type vde approved: din vde0884 / 06.92 J no. 76823 maximum operating insulation voltage: 11 40v pk highest permissible over voltage: 6000v pk (note 1) when a vde0884 approved type is needed, please designate the ? option (d4) ? structural parameter creepage distance: 8.0mm (min.) clearance: 8.0mm (min.) truth table tr1 tr2 on on off input led off off on unit in mm toshiba 11 ? 10c402 weight: 0.54 g tentative
TLP250F 2002-09-25 2 pin configuration (top view) schmatic 2+ v f i f 3- i cc (t r 1) 6 v o 5 gnd (t r 2) i o 7 v o 8 v cc 8 7 6 5 1 : n.c. 2 : anode 3 : cathode 4 : n.c. 5 : gnd 6 : v o (output) 7 : v o 8 : v cc 1 2 3 4 (note 2) a 0.1f bypass capcitor must be connected between pin 8 and 5.
TLP250F 2002-09-25 3 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. gallium arsenide (gaas) is a substance used in the products described in this document. gaas dust and fumes are toxic. do not break, cut or pulverize the product, or use chemicals to dissolve them. when disposing of the products, follow the appropriate regulations. do not dispose of the products with other industrial waste or with domestic garbage. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707ebc restrictions on product use
|
